Asset management - MaxAsset

The LINK loadcell-to-USB is a small light box that connects directly to a USB connector on a PC – and a loadcell. No external power supply is required. The unit comes with the TramSmart software running on Microsoft Windows XP/Vista/Windows 7 Using the TramSmart software you can save identification (with calibration data) for several loadcells, and when starting the TramSmart software you select the connected loadcell from a list. The load is displayed on the PC and it can be transferred to any Windows program – just by using a shortcut key. Due to the extremely high accuracy, it is ideal for calibration purposes, but it is also very handy for all kinds of in-field measurements. You can save snapshot values or you can select continuous sampling – and the data will be put in the clipboard – ready for pasting into any program. The TSU – Sensor to USB: Is ideal for a full-bridge sensor, e.g. a loadcell, pressure sensor, or an extensometer. It can also be used for potentiometer, thermocouple, and other low voltage sensors. Is an easy way to record measurements of force, strain, position, temperature, etc. on a PC. Is ideal for both snapshot as well as continuous recording. Have an outstanding accuracy and a resolution with more than 1 million divisions. Is ideal for various laboratory and in-field measurements. Is the answer for all calibration purposes with force/pressure sensors and extensometer. Is small and light – only 470 g Simultaneous sampling of all channels Optional external trigger button in a 2m long wire Simple to use software will enable the operator to grow familiar with the LINK-sensor-to-USB after a very short time, even if he has no experience at all in operating a PC. The equipment offers a great opportunity to improve both laboratory and in-field measurements through instantaneous data generation. It is ideal for calibrating testing machines according to EN ISO 7500-1. With TramSmart for Microsoft Windows XP/Vista/Windows 7: Automatically detects LINK 4-loadcell-to-USB at startup of TramSmart On demand or continuous recording of measurements Various calibration methods and identification of any channel combination Simultaneously display of all channels and channel-combinations. Shortcut key to transfer measurements to any MS Windows program. Optional display of additional devices, e.g. Thickness Gauge, Extensometer, extra loadcells, balances, etc. Due to the modular design and the versatility of the software, tailored systems can be offered at a moderate price. Please contact TRAM or your local distributor for additional information.

The LINK loadcell-to-USB is a small light box that connects directly to a USB connector on a PC – and a loadcell. No external power supply is required. The unit comes with the TramSmart software running on Microsoft Windows XP/Vista/Windows 7 Using the TramSmart software you can save identification (with calibration data) for several loadcells, and when starting the TramSmart software you select the connected loadcell from a list. The load is displayed on the PC and it can be transferred to any Windows program – just by using a shortcut key. Due to the extremely high accuracy, it is ideal for calibration purposes, but it is also very handy for all kinds of in-field measurements. You can save snapshot values or you can select continuous sampling – and the data will be put in the clipboard – ready for pasting into any program. The TSU – Sensor to USB: Is ideal for a full-bridge sensor, e.g. a loadcell, pressure sensor, or an extensometer. It can also be used for potentiometer, thermocouple, and other low voltage sensors. Is an easy way to record measurements of force, strain, position, temperature, etc. on a PC. Is ideal for both snapshot as well as continuous recording. Have an outstanding accuracy and a resolution with more than 1 million divisions. Is ideal for various laboratory and in-field measurements. Is the answer for all calibration purposes with force/pressure sensors and extensometer. Is small and light – only 470 g Simultaneous sampling of all channels Optional external trigger button in a 2m long wire Simple to use software will enable the operator to grow familiar with the LINK-sensor-to-USB after a very short time, even if he has no experience at all in operating a PC. The equipment offers a great opportunity to improve both laboratory and in-field measurements through instantaneous data generation. It is ideal for calibrating testing machines according to EN ISO 7500-1. With TramSmart for Microsoft Windows XP/Vista/Windows 7: Automatically detects LINK 4-loadcell-to-USB at startup of TramSmart On demand or continuous recording of measurements Various calibration methods and identification of any channel combination Simultaneously display of all channels and channel-combinations. Shortcut key to transfer measurements to any MS Windows program. Optional display of additional devices, e.g. Thickness Gauge, Extensometer, extra loadcells, balances, etc. Due to the modular design and the versatility of the software, tailored systems can be offered at a moderate price. Please contact TRAM or your local distributor for additional information.