Products in Sydkorea

Tilpas min søgning:
Tilbage
Tilpas min søgning:

Efter branche

Efter land

Alle lande 
Se Trusted topleverandører

2GPP Carbide drill for S45C, SCM, cast steel

Korean carbide drill. This carbide drill is used for machining automotive parts such as S45C, SCM, c...

COGO TOOL CO.,LTD.

Korean carbide drill. This carbide drill is used for machining automotive parts such as S45C, SCM, cast steel, and cast iron. • Suitable for various processing such as carbon steel, alloy steel and sp...

2GBS for Carbon Steels cutting | 2GBS Drills

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast s...

COGO TOOL CO.,LTD.

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast steels and cast iron etc. of automobile parts. • FLUTE design considering optimal tool stiffness and ...

2&3 ROD _ K DENTAL ROLAND

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a ROLAND type.

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a ROLAND type.

2&3ZID _ K DENTAL ZIRKONZAHN

2&3 Flutes Endmills for Zirconia ZIRKONZAHN Korea dental endmill

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia ZIRKONZAHN Korea dental endmill

2WSB for stainless steel cutting | high hardness End Mills

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high ha...

COGO TOOL CO.,LTD.

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high hardness work pieces. (HRC40~62) • Dividin and double flute make it easy to prevent shaking and chip e...

1&2 IMN_ K DENTAL IMES-ICORE

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a...

COGO TOOL CO.,LTD.

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a IMES-ICORE type.

2HOB til kobberskæring | Kobberender

K-COPPER: 2HOB - 2 fløjter 45 ° Helix Rib Ball End Mills til kobber * Endeværker til kobber, kobberl...

COGO TOOL CO.,LTD.

K-COPPER: 2HOB - 2 fløjter 45 ° Helix Rib Ball End Mills til kobber * Endeværker til kobber, kobberlegering, ikke-jernholdige og ikke-metalliske materialer. • Forbedre slidstyrke såvel som undgå kants...

1&2&3 VHN _ K DENTAL VHF

1&2&3 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmil...

COGO TOOL CO.,LTD.

1&2&3 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is VHF type.

2 ROB _ K DENTAL ROLAND

2 Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a RO...

COGO TOOL CO.,LTD.

2 Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a ROLAND type.

2GSS ,Solid Carbide Drill

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materi...

COGO TOOL CO.,LTD.

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materials such as cast steel, cast iron, non-ferrous metals and plastics by using high-grade tungsten carb...

4BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...

2VHB _ K DENTAL VHF

2 Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a VH...

COGO TOOL CO.,LTD.

2 Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a VHF type.

B-Hard End Mills | 2BCB til hærdet stål under HRC70 skæring

B- HARD: 2BCB-2Flutes Standard Ball End møller * Møller til forhærdet og hærdet stål (HRC52 ~ 70) • ...

COGO TOOL CO.,LTD.

B- HARD: 2BCB-2Flutes Standard Ball End møller * Møller til forhærdet og hærdet stål (HRC52 ~ 70) • Designet til højhastighedsskæring af hærdede stål over HRc52. • Maksimer slidstyrken på grund af TiS...

4KEM til hærdet stål under HRC60 skæring | Hard End Mills

K-HARD: 4KEM-4 Fløjter 43˚ Square End Mills * Endeværker til forhærdet og hærdet stål (HRC52 ~ 60) •...

COGO TOOL CO.,LTD.

K-HARD: 4KEM-4 Fløjter 43˚ Square End Mills * Endeværker til forhærdet og hærdet stål (HRC52 ~ 60) • Designet til højhastighedsskæring af hærdede stål over HRc50. • Maksimer slidstyrken på grund af Ti...

2WCB for Heat treated steel / SUS | S HARD Stamdard Ball

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardne...

COGO TOOL CO.,LTD.

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40 ~ 62 • Dividing and double flute make it eassy to prevent shaking and chip e...

2MFD &2MFL Flat drill

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for mater...

COGO TOOL CO.,LTD.

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for material below HRC50, pre-hardened steel, alloy steel, cast iron and aluminum. *With flat type of end fac...

2&3 AMD _ K DENTAL AMANN GIRRBACH

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a AMANN GIRRBACH t...

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a AMANN GIRRBACH type.

1&2&3 ZIN _ K DENTAL ZIRKONZAHN

1&2&3 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmil...

COGO TOOL CO.,LTD.

1&2&3 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a ZIRKONZAHN type.

4VSU Variable Helix Endmills for SUS

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base all...

COGO TOOL CO.,LTD.

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials. *JCRO coating provides wear resistance improvement as well as...

1&2 RON _ K DENTAL ROLAND

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a...

COGO TOOL CO.,LTD.

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a ROLAND type.

4DRC for Carbon, Alloy, Prehardened, Heat Treaded Steels + Copper | Corner Rounding Cutter

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, too...

COGO TOOL CO.,LTD.

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, tool steel and cast iron • High precise edge tolerance. • Very nice work surface finish. To purchase a ...

1ARD _ K DENTAL ARUM

1Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill This dental endmill is ARUM type...

COGO TOOL CO.,LTD.

1Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill This dental endmill is ARUM type.

3AHF mirror finishing endmill for aluminum

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL...

COGO TOOL CO.,LTD.

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials. *By 25° helix flute edge design with the after-treat...

3AHE til aluminiumskæring | Aluminiumsslibemøller

K-ALUMINIUM: 3AHE-3 Fløjter 45 ° Helix Ende Møller til aluminium * Endeværker til aluminium, AL-lege...

COGO TOOL CO.,LTD.

K-ALUMINIUM: 3AHE-3 Fløjter 45 ° Helix Ende Møller til aluminium * Endeværker til aluminium, AL-legeringer, ikke-jernholdige og ikke-metalliske materialer. • Anvendt ultrafint toiletklasse (0,2㎛) for ...

2BRB for Heat Treated Steels | B HARD Rib Ball Endmills

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70...

COGO TOOL CO.,LTD.

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance du...

2 IMB _ K DENTAL IMES-ICORE

2 Flutes Endmills for Cobalt Chrome & Titanium. Korea dental endmill. This dental endmill is IME...

COGO TOOL CO.,LTD.

2 Flutes Endmills for Cobalt Chrome & Titanium. Korea dental endmill. This dental endmill is IMES-ICORE type.

4WCR / S-HARD for corner radius endmills

S-HARD endmill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel s...

COGO TOOL CO.,LTD.

S-HARD endmill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel series. • Dividing and double flute make it easy to prevent shaking and chip ejection. • Enables high...

2ART _ K DENTAL ARUM

2 Flutes Endmills for Cobalt Chrome & Titanium Korean dental endmill. This dental endmill is a A...

COGO TOOL CO.,LTD.

2 Flutes Endmills for Cobalt Chrome & Titanium Korean dental endmill. This dental endmill is a ARUM type.

2KSB for Prehardened Steels, Heat Treated Steels | K HARD Short Ball

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~...

COGO TOOL CO.,LTD.

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~ 60) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance...

2 WIB _ K DENTAL WIELAND

2Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a WIE...

COGO TOOL CO.,LTD.

2Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill. This dental endmill is a WIELAND type.

2WCR | S HARD Corner Radius Endmills

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to...

COGO TOOL CO.,LTD.

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40~62 • Dividing and double flute make it easy to prevent saking an...

2GSL carbide long drill

Korean carbide drill. This carbide long drill is used for machining automotive parts such as S45C, S...

COGO TOOL CO.,LTD.

Korean carbide drill. This carbide long drill is used for machining automotive parts such as S45C, SCM, cast steel, and cast iron. • It is suitable for a wide range of workpiece materials such as cast...

2SIB _ K DENTAL SIRONA

2Flutes Endmills for Cobalt Chrome & Titanium. Korea dental endmill. This dental endmill is a SI...

COGO TOOL CO.,LTD.

2Flutes Endmills for Cobalt Chrome & Titanium. Korea dental endmill. This dental endmill is a SIRONA type.

4TSR, 4TSC T-Slot Cutter

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(...

COGO TOOL CO.,LTD.

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(HRC~50), pre-hardened steel,tool steel and cast iron. *Minimize edge chipping by applying straight 4...

4BCE fpr Heat Treated Steels | B HARD Square Endmills

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) ...

COGO TOOL CO.,LTD.

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due ...

4FCE for Alloy Steels | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

4TNA Helix Nick Type Thread Mill

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Al...

COGO TOOL CO.,LTD.

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Aluminum alloy, non-ferrous and non-metallic materials. *High spindle speed and feed per tooth are ava...

2&3 IMD _ K DENTAL IMES-ICORE

2&3 Flutes Endmils For Zirconia Korea dental endmill. This dental endmill is a IMES-ICORE type.

COGO TOOL CO.,LTD.

2&3 Flutes Endmils For Zirconia Korea dental endmill. This dental endmill is a IMES-ICORE type.

4WCE for Heat treated steel / SUS | S HARD Square Endills

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to ...

COGO TOOL CO.,LTD.

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40~62) • Dividing and double flute make it easy to prevent shaking and...

5&6 MTR Trochoidal Milling End Mills

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,...

COGO TOOL CO.,LTD.

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,inconel, soft steel, SUS and various hard to cut materials. *HR coating reduces stress of flute and ...

K-ABS End Mills | 1NEM for Acryl, ABS, Aluminum, Endmills

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materia...

COGO TOOL CO.,LTD.

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials • Excellent chip removing by a helix flute design. • Optimum for cut-off and wall machining.

2&3 VHD _ K DENTAL VHF

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a VHF type.

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a VHF type.

1&2&3 WIN _ K DENTAL WIELAND

1&2&3 Flutes Endmills for PEEk & PMMA & WAX Korea dental endmill. This dental endmil...

COGO TOOL CO.,LTD.

1&2&3 Flutes Endmills for PEEk & PMMA & WAX Korea dental endmill. This dental endmill is a WIELAND type.

1&2 AMN_ K DENTAL AMANN GIRRBACH

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a...

COGO TOOL CO.,LTD.

1&2 Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is a AMANN GIRRBACH type.

2&3 WID _ K DENTAL WIELAND

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a WIELAND type.

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a WIELAND type.

2ZIB _ K DENTAL ZIRKONZAHN

2Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill This dental endmill is ZIRKON...

COGO TOOL CO.,LTD.

2Flutes Endmills for Cobalt Chrome & Titanium Korea dental endmill This dental endmill is ZIRKONZAHN type.

4ESE for Carbon + Alloy + Prehardened Steels | K BLUE Endmills for Heavy cuts

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-...

COGO TOOL CO.,LTD.

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-hardened steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel • Good wear resistance by h...

2SID _ K DENTAL SIRONA

2 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a SIRONA type.

COGO TOOL CO.,LTD.

2 Flutes Endmills for Zirconia Korea dental endmill. This dental endmill is a SIRONA type.

2DBL til grafitskæring | Grafite slutfræser

K-GRAPHITE: 2DBL- 2 fløjter Diamond Coated Ball End Mills til grafit * Endeværker til grafit, forstæ...

COGO TOOL CO.,LTD.

K-GRAPHITE: 2DBL- 2 fløjter Diamond Coated Ball End Mills til grafit * Endeværker til grafit, forstærket plast, carbonfiber, ikke-jernholdige og ikke-metalliske materialer. • Bredt sortiment forberedt...

8ECP end mills for composite

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/...

COGO TOOL CO.,LTD.

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/carbon fiber, graphite, nonferrous and non-metallic materials. *Outstanding performance in machining...

2WCE til opskæring af rustfrit stål | høj hårdhed End Mills

S-hard : 2WCE - 2Flutes Standard Endmill * Forhærdet stål kan påføres mellemstore til høje hårdhedsa...

COGO TOOL CO.,LTD.

S-hard : 2WCE - 2Flutes Standard Endmill * Forhærdet stål kan påføres mellemstore til høje hårdhedsarbejdsstykker. (HRC40~62) • Dividin og ddouble fløjte gør det nemt at forhindre rysten og spånudstød...

4FNR | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

2&3 ARD _ K DENTAL ARUM

2&3 Flutes Endmills for Zirconia ARUM DENTAL ENDMILL

COGO TOOL CO.,LTD.

2&3 Flutes Endmills for Zirconia ARUM DENTAL ENDMILL

EPD _ K DENTAL ELECTRO DEPOSITED DIAMOND

Endmills for Glass Ceramic ELECTRO DEPOSITED DIAMOND Korean dental endmill

COGO TOOL CO.,LTD.

Endmills for Glass Ceramic ELECTRO DEPOSITED DIAMOND Korean dental endmill

2HGB for Carbon, Alloy, Prehardened Steels | Ball Endmills for Generality

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various wor...

COGO TOOL CO.,LTD.

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel • High precise edge tolerance. • M...

2BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...

2SIN _ K DENTAL SIRONA

2Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is SIRONA t...

COGO TOOL CO.,LTD.

2Flutes Endmills for PEEK & PMMA & WAX Korea dental endmill. This dental endmill is SIRONA type.
Tilbage til toppen